Inch and One Half (41) Electrical Conduit Dimensions

One Inch and One Half 1 1/2″ is the trade size, not the actual dimension of electrical conduit.  Forty One 41 is the metric designator not the actual dimension in millimeters.  The dimensions for various types of 1 1/2″ electrical conduits are below.  The information was derived from several sources and should not be considered precise.  Dimensions may vary slightly between manufacturers.

1 1/2″ (41) Electrical Metallic Tubing (EMT or Thinwall) is a smooth lightweight galvanized metal conduit that has an inside diameter of 1.610″ or 40.89mm.  The outside diameter is 1.740″ or 44.2mm.  The wall thickness of 1 1/2″ EMT is .065″ or 1.65mm.  100 feet of 1 1/2″ EMT weighs approximately 116 pounds or 52.6 kilograms.  It requires a 1 7/8″ hole for the conduit fittings.  A tap needs a 1 47/64″ hole.  Threads per inch for the fittings is 11.5 NPT.

1 1/2″ (41) Rigid Metal Conduit (RMC or Rigid) is a heavy weight conduit with a galvanized finish throughout.  It has factory threads with a 3/4″ per foot taper,  11.5 threads per inch NPT.  100′ of RMC weighs approximately 263 pounds or 119.3 kilograms.  It has an inside diameter of 1.610″ or 40.89mm  It has an outside diameter of 1.900″ or 48.3mm.  The wall thickness is .138″ or 3.50mm.  1 1/2″ Rigid requires a 1 7/8″ hole for the conduit and fittings.  A tap needs a 1 47/64″ hole.

1 1/2″ (41) Intermediate Metal Conduit (IMC) is a lighter weight version of RMC.  It has a galvanized finish inside and out and can be used in many of the same environments as RMC.  It has factory threads with a 3/4″ per foot taper, and 11.5 threads per inch NPT.  It also utilizes the same couplings and fittings as RMC.  100 feet of 1 1/2″ IMC weighs approximately 194 pounds or 88 kilograms.  1 1/2″ IMC has an inside diameter of 1.703″ or 42.7mm.  It has an outside diameter of 1.883″ or 47.8mm.  The wall thickness is .1″ or 2.54mm.

1 1/2″ (41) Flexible Metal Conduit (FMC or Greenfield, Flex) is a galvanized finished flexible metal electrical conduit composed of a continuously formed interlocking metal strip.  100 feet of 1 1/2″ Reduced Wall Steel Greenfield weighs approximately 78 pounds  (35.38 kilograms).  Reduced Wall 1 1/2″ Aluminum FMC weighs 31 pounds or 14.06  kilograms.  1 1/2″ FMC has a minimum inside diameter of 1.500″ or 38.1mm and a maximum inside diameter of 1.575″ or 40.005mm.  It has a minimum outside diameter of 1.850″ or 46.99mm and a maximum outside diameter of 1.950″ or 49.53mm.  The minimum bending radius is 10 inches or 254mm.  1 1/2″ Flex requires a 1 7/8″ hole for the conduit fittings.  A tap needs a 1 47/64″ hole.  Threads per inch for the fittings is 11.5 NPT.

1 1/2″ (41) Rigid Polyvinyl Chloride Conduit (PVC) schedule 40 is a nonmetallic, non-conductive electrical conduit that is good to use indoors and outdoors, or underground.  It has some flexibility with an inside diameter of 1.610″ or 40.89mm.  It has an outside diameter of 1.900″ or 48.26mm.  The wall thickness is .145″ or 3.683mm.  1 1/2″ Schedule 40 weighs 55 pounds per 100 feet (24.94756 kilograms).  1 1/2″ PVC requires a 1 7/8″ hole for the conduit fittings.  A tap needs a 1 47/64″ hole.  Threads per inch for the fittings is 11.5 NPT.

1 1/2″ (41) Rigid Polyvinyl Chloride Conduit (PVC) schedule 80 is a nonmetallic, non-conductive electrical conduit that is good to use indoors and outdoors, or underground.  It has limited flexibility.  Schedule 80 has an inside diameter of 1.50″ or 38.10mm.  It has an outside diameter of 1.900″ or 48.26mm.  The wall thickness is .200″ or 5.08mm.  1 1/2″ Schedule 80 weighs 72 pounds per 100 feet and 32.66 kilograms.  1 1/2″ PVC requires a 1 7/8″ hole for the conduit fittings.  A tap needs a 1 47/64″ hole.  Threads per inch for the fittings is 11.5 NPT.

1 1/2″ (41) Electrical Nonmetallic Tubing (ENT or Smurf) is a nonmetallic, non-conductive flexible conduit with an inside diameter of 1.554″ or mm.  It weighs 39 pounds per 100 feet or 17.69 kilograms.  1 1/2″ ENT has an outside diameter of 1.90″ or 48.26mm.  The minimum bend radius is 8.25 inches.  1 1/2″ fittings requires a 1 7/8″ hole.  A tap needs a 1 47/64″ hole.  Threads per inch for the fittings is 11.5 NPT

1 1/2″ (41) Liguidtight Flexible Metal Conduit (LFMC or Sealtight) is a flexible metal conduit with a non-metallic, non-conductive outer jacket that makes it suitable for use in wet locations.  100 feet of 1 1/2″ Sealtight weighs 98 pounds or 44.45 kilograms.  It has an inside minimum diameter of 1.575″ or 40.005mm and a maximum inside diameter of 1.600″ or 40.64mm.  It has a minimum outside diameter of 1.865″ or 47.37mm and a maximum outside diameter of 1.900″ or 48.26mm.  The minimum bending radius is 10 inches (254mm).  Fittings requires a 1 7/8″ hole.  A tap needs a 1 47/64″ hole.  Threads per inch for the fittings is 11.5 NPT.

1 1/2″ (41) Liguidtight Flexible Nonmetallic Conduit (LFNC or CarFlex) is a nonmetallic conduit that is suitable for wet conditions.  100′ of 1 1/2″ Carflex weighs 48 pounds.  It has an inside minimum diameter of 1.575″ or 40.005mm and a maximum inside diameter of 1.600″ or 40.64mm.  It has a minimum outside diameter of 1.865″ or 47.37mm and a maximum outside diameter of 1.900″ or 48.26mm.  The minimum bending radius is 9 inches or 228.6mm.  It requires a 1 7/8″ hole for the conduit fittings.  A tap needs a 1 47/64″ hole.  Threads per inch for the fittings is 11.5  NPT.

1 1/2″ (41) Reinforced Thermosetting Resin Conduit (RTRC or Fiberglass) is a nonmetallic conduit that is suitable for many conditions.  It has an inside diameter of 1.760″ or 44.704mm.  Outside diameter is 1.900″ or 48.26mm..  The conduit wall thickness is .070″ or 1.778mm.  100 feet of one and a half inch SW RTRC weighs 33 pounds and 14.968536 kilograms.  It requires a 1 7/8″ hole for the conduit fittings.  A tap needs a 1 47/64″ hole.  Threads per inch for the fittings is 11.5 NPT.

1 1/2″ (41) High Density Polyethylene (HDPE) is a non-metallic flexible conduit available in long reel lengths to reduce joints and installation time.  It has an outside diameter of 1.900″ or 48.26mm.  Type SDR-9 has an inside diameter of 1.453″ or 36.9062mm.  100 feet of 1 1/2″ HDPE weighs 48.5 pounds or 21.999212 kilograms.  The wall thickness is .211″ or 5.3594mm.

All one and a half inch 1 1/2″ (41) conduit and fittings require a inch and seven eighth 1 7/8″ opening into an electrical box.  The hole can be made with a hole saw or a knockout punch.

A tap for one and a half inch 1 1/2″ (41) conduit or conduit fittings requires a 1 47/64″ hole.  The threads per inch is 11.5 National Pipe Thread (NPT).

The standard length for most conduits is ten feet 10′ or 3.048 meters.  Twenty foot 20′ (6.096 meters) lengths of metal conduit are available, but not always in stock.  PVC conduit is available in ten foot 10′ and in some sizes, twenty foot 20′ lengths.  RTRC mostly comes in twenty foot 20′ lengths.  The flexible conduits come in various length coils and reels depending on the trade size.  Some electrical supply companies will cut flexible conduit to length.

See my post describing various electrical conduit types.

Other size electrical conduits: 1/2″ (16)

3/4″ (21)       1″ (27)       1 1/4″ (35) 

2″ (53)       2 1/2″ (63)        3″ (78)

3 1/2″ (91)       4″ (103)      5″ (129)

6″ (155)

For more conduit code details and conduit fill see Chapter 9, Tables 1, 4, 5 and 5A.
See the tables in Informative Annex C in the back of the National Electrical Code (NFPA 70) for the allowable number of wires in each size conduit.