fbpx
Home Generator Interlock Kit for a Cutler Hammer Loadcenter Copyright-460x613-MS-GeneratorBreaker-IMG_6755

Copyright-460×613-MS-GeneratorBreaker-IMG_6755

Note how the number 10 bare copper ground wire is shaped in the rear of the generator inlet box and then wrapped around the green ground screw using the included clamp.

An inexpensive circuit tracer comes in handy when trying to identify important circuits before you have a need to turn on the generator.

A button type Romex connector was used to prevent the 10/3 Romexfrom being pulled out. The generator inlet box was secured to the wood siding using #8 x 1-1/2 inch pan-head sheet metal screws.
Installed Interlock kit on a Cutler Hammer Circuit Breaker Panel