fbpx
Home Generator Interlock Kit for a Cutler Hammer Loadcenter Copyright-460x623-CS-DirectoryLoadCenter-IMG_6647

Copyright-460×623-CS-DirectoryLoadCenter-IMG_6647

Note how the number 10 bare copper ground wire is shaped in the rear of the generator inlet box and then wrapped around the green ground screw using the included clamp.

The homeowner had typed up a panel directory for most of the circuits years before this installation. It came in handy when identifying critical circuits to run off of the portable generator

Here are the holes with the screws in them and the interlock kit mounted on the front side.
The red tape marks on some of the circuit breakers are there so that the homeowner can easily identify some of the critical circuits that will require generator power. These include the heating system, the well pump, and the refrigerator. The bathroom and kitchen lighting circuits are also identified.